Instant water heater is called instantaneous single point system which heats up cold water instantly to warm water after passing through the heating element without waiting time.
Difference between Storage Water Heater & Instant Water Heater
Instant Water Heater
1 Standing Shower
1 Power Point
Cold Water Pipe
Storage Water Heater System
Storage Water Heater System is a hot tank system for a multipoint solutions which operates with mixer tap system and can supply to more than 1 shower point such as bathtub, jacuzzi, rainshower, sink or basin or washing machine.
Multipoint System
1 Power Point
Hot & Cold Pipes
Here are few tips to consider before buying a instant water heater:
1. Check the piping system in the house.
Water Pressure System
from Mains or Ground Floor:
If your water pressure is from the mains, typically it will be higher hence eliminates the need for the centralised domestic water pump.
Water Pressure System
from Water Tank:
If water pressure is from the water tank and your home is 2-3 storeys high, generally you will need a water pump.
Water Pressure for Apartment / Condominiums:
2. Check for sufficient water pressure.
Comfortable Water Pressure
More than 1.5 Bar or 20psi of water pressure
Booster Pump Water Pressure
4x booster power from normal water pressure.
Option 1: Instant Water Heater with Pump for 1 Shower Point
Inverter Booster
Pump
50% Energy Saving
Low Noise Operations less than 35dB
Durable
SB Series, SL Series, SC Series
Turbo Booster
Pump
30% Energy Saving
Low Noise Operations less than 65dB
Durable
SB Series, SL Series, SC Series
Option 2: Centralised Domestic Water Pump boosts water pressure for entire house
JHP Series Centralised Water Pump
Powerful Water Booster
Noise Reduction Technology
Multistage Centrifugal Pump
JHP Series
*If a centralised Booster Pump is installed for the house, then your Instant Water Heater does not need a booster pump.
3. Choose your accessories
With Rainshower
8'' rainshower bar set
5 spray option
With diverter valve
(switches between standard shower & rainshower)
3.8'' showerhead
Without Rainshower
Chrome Slider Bar Set, Wall Bracket
1, 3 or 5 spray options
Without diverter valve
(standard shower)
3.8'' showerhead
4. Choose your colour
White
Original White Plastic
No Coating
Non-UV resistant
2K Spray
Double Layer Spray Paint Finishing
With Coating - Colour stays longer
Protects from sun UV rays
5. Check your installation point
Plug Point & Wiring Connection:
Amp. based on kW and Vac
Recommended concealed wiring behind the water heater wiring hole.
Concealed Wiring & Piping (Recommended)
Piping: 1/2 BSP Standard Piping
Piping Outlet at 4ft height connect to water heater inlet valve using elbow, felixible hose or PVC pipe. Heater height to position at eye level around 4ft & above from base. Always ensure inlet on the right and outlet on the left.