Innovative Features
Accessories
Safety
The SA20 Series features a compact, stylish & elegantly designed casing measuring only 7cm. Simplicity to complement your bathroom interiors, it comes in 2 colours from silver and white.
Turn the knob to your desired temperature setting with our Stepless Electronic Power Control System for smooth temperature settings.
For that long lasting colour finish that lasts for years to come, our colour models come with double layer 2K Spray paint finish.
(Colour models only)
The casing is sealed to prevent water from accessing the internal parts in-line with splash proof standard.
Your safety are assured with the industry’s safest Single Pole EELS which is 10mA sensitivity. Any current leakage above 10mA, the EELS will cut-out both live & neutral line at high speed.
Protection against power surge which disconnects instantly.
This Anti-Scalding device will prevent against scalding.
This safety device will interrupt power supply in the event of overheating and prevent fire hazard.
Reliable, high performance and efficient copper heating element for constant hot water.
Swirl technology minimises thermal shock and prevent scalding. Nylon Fibre tank insulated structure ensures better heat insulation and prevent electric shock.
The Safety Flow Sensor (SFS) ensures sufficient flow of water before the heater activates to prevent scalding.
5” length 3 Layer Reinforced and Insulated Hose for longer reliability and non-conductive material for better heat insulation and prevent electric shock.
Turn On/Off the water with the 1/4 turn pattern pending SVF Valve with water saving feature and easy clean with built-in filter.
Adjust your showerhead to the height you desire for maximum comfort. The hose material is reinforced with triple layer for longer durability, safety & hygiene with 5 feet length for your comfort.
Shower in extra comfort with the 3.8” showerhead and 5 Spray Options.
Instruction Manual
Local language included
Warranty Card
Local product warranty included
Screw and Wall Plug
5 sets to mount unit on the wall
Washer
2 pieces to be placed at inlet and outlet as water tight seal
Filter Cup
1 piece to be placed at hand shower entry as water tight seal and filter action
Electrical Loading
2.2-5.2kw ; 220-240Va.c. ; 50/60Hz
Min. Water Pressure
10kPa / 1.45psi / 0.1 bar
Max. Water Pressure
380kPa / 55psi / 3.8 bar
Min. Water Flow
2 Litres per minute
Max. Water Flow
8 Litres per minute
Water Temp. Control
Stepless Electronic Power Control
Inlet/Outlet Connection
Ø15mm (1/2″ BSP) – Single Point System
Dimensions
221 x 341 x 76 mm
Weight
2.8kg
Invisible Anchor
Interested in the Product? Fill up the form below
SA Series
SA Series
Malaysia
